Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Car Radio on a Renault Megane 2

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Car stereo

Ensure the car is turned off. Use the extraction pins to remove the car radio by inserting them into the appropriate side holes and pushing them all the way in. Now that it is extracted, remove the black power connector and the yellow steering wheel control connector by pressing the plastic tab and pulling up on each connector (use a screwdriver if needed), and remove the antenna cable by pulling on the metal part (not the cable!). Insert the frame provided with the new radio, threading all the cables through it. Now follow the reverse procedure to install all the cables and secure your new car radio.

Updated on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reactivate the Renault Megane car radio
How to reactivate the Renault Megane car radio
Renault Megane (2002-2010 / Megane 2) In this guide, we will see the instructions that will allow us to reactivate the original radio of the Renault Megane, in simple steps. First of all,…
How to Replace the Radio in a Renault Megane?
How to Replace the Radio in a Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) To replace the radio in a Renault Megane, use a tool to lever off the trim located at the front of the dashboard, on the passenger side. Next, remove…
How to Install the Radio in a Renault Mégane II
How to Install the Radio in a Renault Mégane II
Renault Megane (2002-2010 / Megane 2) Before installing the new radio in a Renault Mégane MK2, you must remove the previous radio; insert extraction keys into the side holes to remove the…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos