Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the "Service" Light on a Renault Megane

Model: Renault Megane Megane 4, Megane IV - Years 2015-2023
Part: Service warning light

Before you start, sit in the driver's seat of your Renault Megane. Begin by activating the instrument cluster without starting the engine. Then, using the selection button on the multifunction steering wheel, display the "Service" page on the multifunction display in the instrument cluster, and confirm. At this point, select and confirm the reset by holding down the confirmation button until the "Service" light turns off, successfully completing the reset.

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Renault Megane 4
How to Reset the Service Light on a Renault Megane 4
Renault Megane (2015-2023 / Megane 4, Megane IV) This video aims to help you reset the service light on your Renault Megane 4. Proceed as follows: after turning on the instrument cluster, use the di…
How to reset the service light on the 2017 Renault Megane
How to reset the service light on the 2017 Renault Megane
Renault Megane (2015-2023 / Megane 4, Megane IV) The reset of the service light on the 2017 Renault Megane must be performed after servicing operations. To reset the service light, we will need to: …
How to Reset the Service Light on the Renault Megane?
How to Reset the Service Light on the Renault Megane?
Renault Megane (2015-2023 / Megane 4, Megane IV) This tutorial shows how to reset the service light on the Renault Megane, a simple and quick operation to perform only after completing all required …

Other guides you may be interested in

    Frequently Asked Questions

    • Megane 2015-2023 - How to reset the "Service" light on a Renault Megane? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos