Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Alternator Belt on a Renault Clio 2 1.2 16V

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: V-belt

In today's video, we will see the instructions that will allow us to remove and replace the alternator belt on a second series Renault Clio with a 1.2 16-valve engine. First, open the engine bonnet and start by unscrewing the two fixing bolts of the alternator; then move the alternator to loosen and remove the belt, as illustrated in the video. At this point, insert the new belt of the correct type, then retighten the alternator, securing it with its screws; follow the video to the end for reassembly!

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Alternator on a Renault Clio 4
Replacing the Alternator on a Renault Clio 4
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In this useful video tutorial, you will see the entire procedure necessary to replace the alternator on a Renault Clio, fourth generation model produ…
How do you replace the alternator of the Renault Clio?
How do you replace the alternator of the Renault Clio?
Renault Clio (1998-2005 / Clio 2, MK 2) The replacement of the alternator of the Renault Clio is done by opening the hood, so that you can have access to the left side of the engine block: …
How to Replace the Timing Belt on a Renault Clio 1.8 16v
How to Replace the Timing Belt on a Renault Clio 1.8 16v
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) The video shows the steps to replace the timing belt on a Renault Clio. First, disconnect the battery terminal and remove the cover. Next, remove the…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos