Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlight Bulb on a Renault Scenic?

Model: Renault Scenic MK III, Scenic III, Scenic 3, MK 3 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Light bulb

See other generations:
Video tutorial

To replace the rear headlight bulbs on the Renault Scenic, you need to remove the entire light unit. Start by removing the panel on the right side of the boot to access the screw underneath.

Then, loosen the bolts located on the left side of the headlight, accessible by lifting the tailgate. At this point, after disconnecting the connector, you can remove the entire light unit.

The bulbs can be easily pulled from their housing and replaced. Finally, reconnect the headlight to the connector and insert it back into its place.


Updated on 22 April 2026 by ScegliAuto


Related tutorials

How to replace the rear headlight bulb of the Renault Scenic 2
How to replace the rear headlight bulb of the Renault Scenic 2
Renault Scenic (2003-2009 / Scenic 2, MK 2) If you own a Renault Scenic Mk2 and are wondering how to replace the rear headlight bulb, then all you have to do is read the following guide and fol…
How to replace the rear headlight bulb of the Renault Scenic 3
How to replace the rear headlight bulb of the Renault Scenic 3
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) To replace the rear headlight bulb of the Renault Scénic model 3, we need to open the trunk and unscrew the three screws located along the side of th…
Replacement of the Rear Headlamp Bulbs on the Renault Scenic
Replacement of the Rear Headlamp Bulbs on the Renault Scenic
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) Today's instructions will allow us to remove and replace the bulbs of the rear headlamp on the Renault Scenic. First, open the rear tailgate of the b…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos