Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the maintenance light on the Renault Laguna 2

Model: Renault Laguna MK 2, X74, Laguna 2 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Warning light – error code

See other generations:
Video tutorial

In today's tutorial, we will see how to reset the regular maintenance light for the oil change on the Renault Laguna second series, following these simple and quick steps. First, get in the car and insert the electronic key to turn on the ignition; then press and hold the button found on the instrument panel, as shown in the video.

At this point, turn off and then turn on the ignition again; then press the central button located on the wiper stalk to complete the reset of the engine oil light!


Updated on 24 April 2026 by ScegliAuto


Related tutorials

Service Reset on a Renault Laguna 2
Service Reset on a Renault Laguna 2
Renault Laguna (2001-2007 / MK 2, X74, Laguna 2) In today's video, we can see how to reset the service light on a Renault Laguna, second generation model. So, let's start the reset procedure by turn…
Reset Service on a Renault Laguna 3
Reset Service on a Renault Laguna 3
Renault Laguna (2007-2015 / MK III, X91, Laguna III, MK 3, Laguna 3) This brief video tutorial shows the procedure to reset the service light on a Renault Laguna, third generation model produced from 2007 to 2015. Firs…
How to Reset the Service Light on a Renault Laguna 2
How to Reset the Service Light on a Renault Laguna 2
Renault Laguna (2001-2007 / MK 2, X74, Laguna 2) Today, you will learn how to reset the service light on a Renault Laguna model 2. To reset the light, you need to use a diagnostic computer that must…

Other guides you may be interested in

    Frequently Asked Questions

    • Laguna 2001-2007 - How to enter the radio code in the Renault Laguna? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos