Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin fan on the Renault Megane?

Model: Renault Megane Megane III, Megane 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Blower motor

See other generations:
Video tutorial

To replace the cabin fan on the Renault Megane, you need to remove the entire dashboard: to do this, unscrew the fixing screws and unclip the plastic covers that make it up. Once all covers are removed, the fan will be located on the right side, beneath the passenger seat, just below the windscreen.

It will be covered by a panel, which must be opened by removing its screws, and once removed, you can extract the fan. This can now be replaced, and all previously removed parts can be reassembled.


Updated on 26 April 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Fan Resistor on the Renault Megane
How to Replace the Cabin Fan Resistor on the Renault Megane
Renault Megane (2002-2010 / Megane 2) Follow these steps to remove and replace the cabin fan resistor on the Renault Megane. First, get into the vehicle on the passenger side and start by…
Guide to Removing the Cabin Fan of the Renault Megane
Guide to Removing the Cabin Fan of the Renault Megane
Renault Megane (2002-2010 / Megane 2) In this brief and simple guide, you will learn how to remove and replace the cabin fan of the Renault Megane. First, get inside the vehicle and start…
Instructions for Removing the Cabin Fan from Renault Megane 2
Instructions for Removing the Cabin Fan from Renault Megane 2
Renault Megane (2002-2010 / Megane 2) In today's tutorial video, you will see the main instructions for removing the cabin fan from a Renault Megane second series. First, get inside the c…

    Frequently Asked Questions

    • Megane 2008-2015 - Where is the resistor of the passenger compartment fan of the Renault Megane 3? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos