Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Setting the time on a Renault Master mk2

Model: Renault Master MK 3 - Years 2010-2023
Part: Clock

As with many other models in the Renault range, to change the time on the Renault Master clock, you need to press a sequence of buttons located on the right stalk behind the steering wheel, specifically on the stalk for operating the windscreen wipers. Hold down the down arrow on the stalk, and after a few seconds, you will see the time flashing on the instrument panel. Press the up and down buttons to adjust the hours. By holding down the down arrow button again for a few seconds, you will move to adjusting the minutes. You can adjust them using the up and down arrows. To complete the operation, press the down arrow button again, and after a few seconds, the time will stop flashing.

Updated on 29 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Setting the Time on a Renault Master 2
Setting the Time on a Renault Master 2
Renault Master (1997-2010 / MK 2) In this brief video tutorial, we will see how to set the time on a second-generation Renault Master, produced from 1997 to 2010. Start by turning on …
How to set the time on the Renault Master 2
How to set the time on the Renault Master 2
Renault Master (1997-2010 / MK 2) In this article, thanks to the support of the video tutorial, we will see how to adjust the time on the Renault Master 2. The procedure takes less th…
How to Set the Time on the Renault Master
How to Set the Time on the Renault Master
Renault Master (1997-2010 / MK 2) This video tutorial shows the procedure to adjust the clock on the Renault Master. The procedure is simple and quick: first, turn on the ignition, th…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos