Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Cabin Fan on Renault Scenic

Model: Renault Scenic - Years 1996-2003
Part: Blower motor

Remove the entire upper dashboard panel near the windscreen. Before doing this, remember to detach the two speaker covers, which are held in place by three small clips: lift these covers with a screwdriver and then pull them back, as shown in the video. Then you can unscrew the screw that secures the dashboard panel. Once done, gently pull the plastic support towards you to unclip it. At this point, detach the lower side plastic on the passenger side. Finally, you can work on the lower part of the dashboard on the passenger side: unscrew the fan screws, remove it, and fit the new part.

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the cabin fan of the Renault Scenic
Replacement of the cabin fan of the Renault Scenic
Renault Scenic (1993-2003 / Scenic 1, MK 1, RX4) Today we will discover the main instructions that will allow us to disassemble and replace the cabin fan of the Renault Scenic. First of all, we get …
Guide to replacing the cabin fan of the Renault Scenic
Guide to replacing the cabin fan of the Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) In this guide, we will see the main instructions on how to disassemble and replace the cabin fan of the Renault Scenic. First of all, we get on board…
Replacing the Cabin Fan Resistor on a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) If the cabin fan speed does not change despite adjusting the speed, it means that the resistor controlling the fan speed is damaged: to carry out thi…

Other guides you may be interested in

    Frequently Asked Questions

    • Scenic 2009-2015 - What to do if the fan does not work on Renault Scenic? Read answer
    • Scenic 2009-2015 - Where is the heater fan resistor of the 2010 Renault Scenic located? Read answer

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos