Do it yourself
Frequently asked questions about cars and motorcycles

Guide to replacing the cabin fan of the Renault Scenic

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Blower motor

In this guide, we will see the main instructions on how to disassemble and replace the cabin fan of the Renault Scenic. First of all, we get on board the car and start by dismantling the entire dashboard; to do this, we will remove all its components, such as the radio and air conditioning controls, the steering wheel, the glove compartment, unscrewing all the fixing screws and disconnecting the various wiring. At this point, we find the cabin fan at the top of the dashboard, unscrewing the screws and disconnecting the electrical connector to remove it and replace it with the new original one.

Posted on 17 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Renault Scenic (1993-2003 / Scenic 1, MK 1, RX4) Today we will discover the main instructions that will allow us to disassemble and replace the cabin fan of the Renault Scenic. First of all, we get …
Renault Scenic (2003-2009 / MK 2, Scenic 2) The cabin fan, the one that pushes air inside the car, could suddenly stop working due to a blocked bearing or because its electrical circuit is burn…
Renault Scenic (2003-2009 / MK 2, Scenic 2) Replacing the fan resistor on a Renault Scenic? Start by removing the plastic cover above the dashboard (instrument cluster) using a lever. Unscrew t…

Other guides you may be interested in

    Frequently Asked Questions

    • Scenic 2009-2015 - What to do if the fan does not work on Renault Scenic? Read answer
    • Scenic 2009-2015 - Where is the heater fan resistor of the 2010 Renault Scenic located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos