Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS Light on a Renault Clio

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Tire pressure warning light

If you have just inflated the tyres of your Renault Clio to the correct pressure, but the warning light continues to illuminate, do not worry as a simple manual reset will resolve the issue. All you need to do is insert the key and turn on the ignition. Then, use the buttons located at the end of the right-hand lever on the steering wheel to navigate through the menu and select the "Tyres pressure Set tpw" option. Finally, press and hold the lower button on the right-hand lever for a few seconds and release it as soon as the TPMS light stops flashing. The reset is complete.

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Tyre Pressure Warning Light on a Renault Clio 4
Resetting the Tyre Pressure Warning Light on a Renault Clio 4
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Today, we will see in this video tutorial how to reset the tyre pressure warning light (TPMS) that appears on the dashboard of the Renault Clio fourt…
How to Reset the Tyre Pressure Warning Light on the Renault Clio
How to Reset the Tyre Pressure Warning Light on the Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Follow this brief and simple guide to reset the Tyre Pressure Monitoring System (TPMS) warning light on the Renault Clio. First, get in the vehicle a…
How to Reset the "Service" Light on a Renault Clio
How to Reset the "Service" Light on a Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Before you begin, sit in the driver's seat of your Renault Clio. Start by activating the instrument panel. Next, select the "Service Interval" option…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos