Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the TPMS light on the Renault Megane

Model: Renault Megane Megane IV, Megane 4 - Years 2015-2023
Part: Tire Warning Light

The procedure required to manually reset the TPMS sensor reading data is really very simple and quick. In this mini guide we will give you all the necessary information so that you can carry out this operation without any kind of problem and in total autonomy. First, make sure that you have closed all the doors properly and that you have switched off the engine. Then insert the key and turn on the ignition. At this point, use the directional arrows to scroll through the car menu and find the item "Tire Pressure". Finally, press and hold the "OK" button for a few seconds and the reset is completed successfully.


Posted on 14 April 2024 by ScegliAuto



How to reset the TPMS light on the Renault Megane?
Renault Megane (2015-2023 / Megane IV, Megane 4) When the TPMS light comes on, it is necessary to adjust the tire pressure. After that, we can proceed with resetting the light. To perform the reset
How to reset the tire pressure warning light on the Renault Megane
Renault Megane (2015-2023 / Megane IV, Megane 4) These short and simple steps will allow us to reset the tire pressure monitoring system (TPMS) light on the Renault Megane; before performing the res
How to reset the tire pressure sensor on the Renault Megane
Renault Megane (2015-2023 / Megane IV, Megane 4) Today's steps will show us the process that will allow us to reset the tire pressure warning light on the Renault Megane; before performing the TPMS

Other guides that may interest you

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos