Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the EGR Valve from the Renault Scenic 1.5 DCI

Model: Renault Scenic MK III, Scenic III, Scenic 3, MK 3 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: EGR valve

See other generations:
Video tutorial

In today's video tutorial, follow the steps to remove and replace the EGR valve from the Renault Scenic 1.5 DCI. First, open the bonnet of your car and start by removing the intake hose by loosening the clamp screw; then disconnect the electrical connector of the EGR valve and unscrew the fixing screws of the manifold attached to the valve itself, as shown in the video.

At this point, clean the valve or directly replace the component; finally, reassemble everything by applying the reverse procedure!


Updated on 29 May 2026 by ScegliAuto


Related tutorials

Where to find and how to remove the EGR valve on a Renault Scenic 1.9 DCi
Where to find and how to remove the EGR valve on a Renault Scenic 1.9 DCi
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) This guide shows how to remove the EGR (Exhaust Gas Recirculation) valve on a Renault Scenic 1.9 DCi. After securing the vehicle and opening the bonn…
Replacing the EGR Valve on a Renault Scenic 1.5 DCi
Replacing the EGR Valve on a Renault Scenic 1.5 DCi
Renault Scenic (2003-2009 / Scenic 2, MK 2) In this video tutorial, you will see how to remove and replace (or clean) the EGR valve on a Renault Scenic 1.5 DCi. First, open and lift the bonnet …
Replacement of the EGR valve on the Renault Scenic 2 1.9 dCi
Replacement of the EGR valve on the Renault Scenic 2 1.9 dCi
Renault Scenic (2003-2009 / Scenic 2, MK 2) Let's see how to replace the EGR valve on the Renault Scenic II 1.9 dCi: it is a rather complex job, in fact to access it you need to remove the wind…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos