Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the EGR Valve on a Renault Scenic 1.5 DCi

Model: Renault Scenic Scenic 2, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: EGR valve

See other generations:
Video tutorial

In this video tutorial, you will see how to remove and replace (or clean) the EGR valve on a Renault Scenic 1.5 DCi. First, open and lift the bonnet and remove the plastic cover located under the wipers by unscrewing all the fixing screws; then unscrew the wiper screws and remove them along with the arms.

At this point, remove the internal engine cover and take off the central intake hose, which is attached to the EGR valve; then unscrew the fixing screws of the valve and disconnect the electrical connector to remove it, as shown in the video!


Updated on 17 April 2026 by ScegliAuto


Related tutorials

Guide to Removing the EGR Valve from the Renault Scenic 1.5 DCI
Guide to Removing the EGR Valve from the Renault Scenic 1.5 DCI
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) In today's video tutorial, follow the steps to remove and replace the EGR valve from the Renault Scenic 1.5 DCI. First, open the bonnet of your car a…
Where to find and how to remove the EGR valve on a Renault Scenic 1.9 DCi
Where to find and how to remove the EGR valve on a Renault Scenic 1.9 DCi
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) This guide shows how to remove the EGR (Exhaust Gas Recirculation) valve on a Renault Scenic 1.9 DCi. After securing the vehicle and opening the bonn…
Replacement of the EGR valve on the Renault Scenic 2 1.9 dCi
Replacement of the EGR valve on the Renault Scenic 2 1.9 dCi
Renault Scenic (2003-2009 / Scenic 2, MK 2) Let's see how to replace the EGR valve on the Renault Scenic II 1.9 dCi: it is a rather complex job, in fact to access it you need to remove the wind…

Other guides you may be interested in

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos