Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Brake Fluid Replacement Instructions

Model: Renault Megane Megane 1 - Years 1995-2003
Part: Brake pads

Bleeding the braking system removes any air bubbles present in the system. The bleeding operation is very simple and does not require special equipment: you can perform it by simply pumping the brake pedal while keeping the respective bleed screws open (one at a time), ensuring that the reservoir is always filled with clean fluid. Alternatively, you can use a manual pump connected to the brake fluid reservoir, which can maintain pressure in the system and introduce clean fluid during the bleeding phase; connect the bleed screw to a tube to collect the fluid in a bottle and open the screw. Repeat the operation on all four wheels.

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Replacing Brake Fluid
Renault Megane (1995-2003 / Megane 1) Replacing the brake fluid is a maintenance task that is often overlooked, as it is assumed that in a closed circuit like the brakes, wear issues do n…
Replacing Front Brake Pads
Renault Megane (1995-2003 / Megane 1) Before lifting the vehicle, loosen the wheel fastening bolts without completely unscrewing them. Then lift the car and secure it on proper axle stand…
How to Change the Front Brake Pads on the Renault Megane II
How to Change the Front Brake Pads on the Renault Megane II
Renault Megane (2002-2010 / Megane 2) Here’s how to easily change the brake pads on the Renault Megane II: start by opening the brake fluid reservoir cap. You will need to remove the fron…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos