Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Remote Battery (Card) on a Renault Clio 4

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Key

Today, in this video tutorial, see how to dismantle and replace the battery of the remote key or electronic card of the Renault Clio fourth series. First, take your remote and start by removing the physical key from inside it; then lever on the sides to remove the plastic cover, thus accessing the battery compartment, as shown in the video. Now replace the battery with a new one of the correct type (in this case, a CR 2032 3V); insert it correctly into the card and assemble everything, following the video to the end!

Updated on 8 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Open the Doors with a Flat Remote Battery on a Renault Clio
How to Open the Doors with a Flat Remote Battery on a Renault Clio
Renault Clio (2019-2026 / Clio V, Clio 5) Today's instructions will allow you to open the doors of a Renault Clio with a flat remote battery. First, take your remote and extract the physical …
How to Replace the Remote Battery on a Renault Clio?
How to Replace the Remote Battery on a Renault Clio?
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) To replace the remote battery on a Renault Clio, press the designated button at the top of the device to lift the ignition key. Use a screwdriver to …
How to Replace the Battery in the Renault Clio Remote?
How to Replace the Battery in the Renault Clio Remote?
Renault Clio (2019-2026 / Clio V, Clio 5) To replace the battery in the Renault Clio remote, extract the key from the top of the key card. Once removed, pry it up to lift the circular plastic…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos