Do it yourself
| ||||
|
Renault Scenic - Video tutorial
Model: Renault Scenic
MK III, Scenic III, MK 3, Scenic 3
- Years 2009-2015 Replacing the battery of the Renault Scénic remote control is very simple, let's see how to proceed in this tutorial. For this operation we only need a small flat-tip screwdriver and, of course, a CR2032 replacement battery. We start by extracting the metal emergency key, then insert the tip of the screwdriver into the central slot and, leveraging, open the small rear door. At this point, remove the old battery again helping us with the screwdriver and insert the new one, taking care to position it with the positive pole facing upwards.
Posted on 17 August 2022 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.059
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |