Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Renault Scenic?

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Warning light – error code

As shown in this tutorial, resetting the service light on a Renault Scenic 2 is very simple. This procedure should only be followed after completing all required scheduled maintenance work. First, insert the key and turn on the instrument panel, not the engine. Next, scroll through the various screens on the display using the directional arrows on the right lever, then navigate to the maintenance screen and hold down the up arrow button. Maintain pressure for about 10 seconds, or for as long as needed for the light to disappear.

Updated on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the Service light on a Renault Scenic?
How to reset the Service light on a Renault Scenic?
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) To reset the Service light on a Renault Scenic, press the ignition button without pressing any pedals, so that only the instrument cluster lights up …
How to Reset the Service Light on the Renault Scenic 4?
How to Reset the Service Light on the Renault Scenic 4?
Renault Scenic (2016-2022 / MK IV, Scenic 4, MK 4, Scenic IV) To reset the Service light on the Renault Scenic 4, turn on the instrument cluster by rotating the ignition key in the ignition switch. Once the disp…
How to Reset the Service Light on a Renault Scenic 3
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) If you want to manually reset the service light that appears on the instrument cluster of your Renault Scenic third series (2009-2015), simply follow…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos