Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the position lights in Renault Twingo?

Model: Renault Twingo Twingo 1 - Years 1993-2007
Part: Headlight bulb

In this tutorial we can see how to replace the sidelight bulbs in your Renault Twingo, a very simple and fast operation. Before proceeding, let's make sure that the key is not inserted in order to operate safely. Let's start by opening the bonnet, then go near the lighthouse in question and open the relative rear cap. Then identify the bulb of the sidelight located at the bottom, disconnect the connector and separate it from the headlight by pulling it outwards. Finally, insert the spare part avoiding touching it directly with bare hands and, if necessary, repeat the operation for the opposite side.

Posted on 18 December 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Renault Twingo
How to replace the front headlight bulb of the Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) These brief instructions will allow us to disassemble and replace the headlight bulb of the Renault Twingo, in simple steps. First, we open the car's…
Where is the fuse box of the Renault Twingo
Where is the fuse box of the Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) Renault Twingo 2 has only one fuse box, which is located between the steering column and the driver's door, in a small compartment closed by a plasti…
How to replace the fuel filter of the Renault Twingo
How to replace the fuel filter of the Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) To replace the fuel filter of the Renault Twingo, start by unscrewing the fuel filler cap, lift the car on a lift (or rearward), use a crosshead scre…

Other guides you may be interested in

How to Replace the Panel on a Renault Megane

How to replace the panel on a Renault Megane? Don't worry, follow these steps. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Use a lever to remove the plastic cover of the handle, then use a screwdriver to unscrew the internal door handle (unscrew the screws located within). Once the handle is removed, take out the courtesy light and unscrew the internal door opening lever. Detach the door panel and disconnect the speaker. Be careful not to lose any of the clips located behind the plastic panel you removed first. Replace the part and reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos