Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlight Bulb on Renault Modus

Model: Renault Modus MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Tail light bulb

Video tutorial

If you need to replace a bulb in the rear headlight of your vehicle, follow the instructions below and refer to the video. The first step is to open and lift the tailgate, locate the headlight with the blown bulb, and insert your hand behind the light unit to unscrew the wing nut. Then, you can extract the light unit by pulling it towards you from the outside, taking care with the electrical connections at the back.

Next, detach the plate on which the bulbs are fixed, remove the burnt-out bulb, and replace it with a new one that has the same specifications. Reattach the support plate to the headlight and reposition it in its housing before re-tightening the wing nut.


Updated on 2 July 2026 by ScegliAuto


Related tutorials

Replace the Rear Light Bulbs on Renault Modus
Replace the Rear Light Bulbs on Renault Modus
Renault Modus (2004-2013 / MK 1) Replace the rear light bulbs on your Renault Modus. Open the boot lid, then use a screwdriver to remove the securing screws located at the back of th…
Removing Third Brake Light Renault Modus
Removing Third Brake Light Renault Modus
Renault Modus (2004-2013 / MK 1) In this tutorial, learn how to remove the third brake light on a Renault Modus, in case you need to replace the bulbs. First, open the boot and remov…
How to replace the rear headlight bulb of a Renault Modus?
How to replace the rear headlight bulb of a Renault Modus?
Renault Modus (2004-2013 / MK 1) To replace the rear light bulb of a Renault Modus, start by opening the trunk to access the rear light. Locate the access cover on the back of the li…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos