Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the immobiliser on the Renault Clio

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Warning light – error code

When you turn on the ignition and the LED in the centre of the instrument panel flashes, it likely means that the vehicle key has not been recognised, and the ECU will not allow the car to start. To start the car, follow these simple instructions: insert the key into the ignition and turn it to position 2, press and hold the button on the key, then turn the key back to position 1 and then again to position 2. After performing this operation, the LED will turn off, and you will be able to start the engine.

Updated on 3 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Deactivate the Immobiliser on the Renault Clio
How to Deactivate the Immobiliser on the Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) The immobiliser, also known as the immobilizer, is an electronic security device fitted to cars that prevents the engine from running unless a correc…
What Problems Does the Immobiliser on the Renault Clio III Have and How to Solve Them
What Problems Does the Immobiliser on the Renault Clio III Have and How to Solve Them
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) The immobiliser on the Renault Clio III is a security system that can have known issues. It communicates between the key and the engine control unit …
How to Bypass the Immobiliser on the Renault Clio 1500 tdCi
How to Bypass the Immobiliser on the Renault Clio 1500 tdCi
Renault Clio (1998-2005 / Clio 2, MK 2) If, when turning on the ignition, the LED in the centre of the instrument cluster flashes continuously, it means that the engine management ECU has n…

Other guides you may be interested in

    Frequently Asked Questions

    • Clio 2005-2013 - What does the electrical fault warning light mean in the Renault Clio? Read answer
    • Clio 2019-2026 - What are the warning lights on the dashboard of the Clio 5? Read answer
    • Clio 2012-2019 - What is the authentication code in a Clio and where is it located? Read answer
    • Clio 2012-2019 - How can I retrieve the unlock code of the car radio of my Renault Clio? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos