Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Engine Mount on Renault Symbol

Model: Renault Symbol Symbol I - Years 1999-2008
Part: Engine mount

In this guide, we will go through the steps to remove and replace the engine mount on a Renault Symbol. First, lift the vehicle and locate the engine mount, which is situated near the exhaust manifold. Then, use a socket wrench and two 16 mm wrenches to remove the nut from the engine mount bolt, as shown in the video. At this point, replace and install the new engine mount, properly securing the central bolt; use a long lever to assist with the installation!

Updated on 4 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change Engine Oil and Oil Filter on Renault Symbol
How to Change Engine Oil and Oil Filter on Renault Symbol
Renault Symbol (1999-2008 / Symbol I) Below are the steps to perform routine maintenance by replacing the engine oil and oil filter on the Renault Symbol. First, lift the vehicle and star…
Where to Find the Fuse Box of the Renault Symbol 2
Where to Find the Fuse Box of the Renault Symbol 2
Renault Symbol (2008-2012 / Symbol II) If you own a second-generation Renault Symbol and are wondering where the fuse box is located, follow the instructions below. First, completely turn …
How do you reset the partial odometer of the Renault Symbol?
How do you reset the partial odometer of the Renault Symbol?
Renault Symbol (2012-2019 / Symbol III) You can reset the partial odometer of the Renault Symbol by inserting the ignition key into the ignition switch in order to turn on the instrument pa…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos