Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front shock absorbers on a Renault Clio?

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Shocks

See other generations:
Video tutorial

In this tutorial, you will see how to remove the front shock absorbers on a Renault Clio, a simple operation but one that requires good manual skills. First, lift the front of the vehicle, taking the necessary safety precautions, then remove the wheel and undo the fixing bolt of the anti-roll bar. Next, disconnect the brake line, unscrew the two lower fixing bolts, and continue by removing both wipers.

At this point, simply remove the plastic plate, unscrew the last bolts, and separate the shock absorber from the mount.


Updated on 6 July 2026 by ScegliAuto


Related tutorials

How to Replace the Front Shock Absorbers on the Renault Clio
How to Replace the Front Shock Absorbers on the Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Today, you will learn how to remove and replace the front shock absorbers on the Renault Clio. First, open the bonnet of the vehicle and start by rem…
How to replace the shock absorbers on the Renault Clio 4?
How to replace the shock absorbers on the Renault Clio 4?
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) To replace the front shock absorbers on the Renault Clio 4, lift the car so that the corresponding wheel is off the ground. Once the car is lifted, l…
How to Replace the Front Speakers on the Renault Clio
How to Replace the Front Speakers on the Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In this guide, we will see step-by-step instructions that will allow us to remove and replace the front speakers on the Renault Clio. First, open the…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos