|
Do it yourself
| |||
| ||||
How to Replace the Starter Motor on a Renault Clio 4
Model: Renault Clio
Clio IV, MK 4, Clio 4
- Years 2012-2019
To replace the starter motor on a Renault Clio, start by disconnecting the negative terminal of the battery using a 10 mm socket. Raise the car on the right side, remove the underbody protection, and detach the air hose by levering with a flathead screwdriver at the ends. Use pliers to remove the clip holding the intercooler hose, then move it aside. With a 10 mm socket, unscrew the bolt securing the radiator duct and disconnect the connector. Disconnect the intake hose above the starter motor. Using a 10 mm socket, unscrew the nut of the electrical sheath, then with a 10 mm ratchet spanner, unscrew the nut of the positive terminal of the starter, and with an 8 mm socket, remove the negative terminal. Disconnect the starter power supply. Using a 13 mm socket, unscrew the two bolts holding the starter motor and remove it from underneath (there should be more space). Now take the new starter motor, tighten the two 13 mm bolts, and for reassembly, follow the reverse procedure of disassembly.
Updated on 9 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Renault Clio
(2005-2013 /
MK 3, Clio 3, Clio III)
The replacement of the starter motor of the Renault Clio can be done by opening the hood, so that it is possible to have access to the components loc…
Renault Clio
(1998-2005 /
Clio 2, MK 2)
In today's video, we will see the main instructions that will allow us to dismantle and replace the starter motor on the Renault Clio 1.2 8V petrol. …
Renault Clio
(2012-2019 /
Clio IV, MK 4, Clio 4)
The information provided in this guide will show us the procedure for disassembling and replacing the starter motor of the Renault Clio 1.5 dCi. Firs…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Reset the Central Locking of the Volkswagen Golf 4?
If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.466
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |