Do it yourself
Frequently asked questions about cars and motorcycles

Using the Tyre Pressure Monitoring System on the Renault Twingo

Model: Renault Twingo Twingo 3, Twingo III - Years 2014-2024
Part: Instrument cluster

The tyre pressure monitoring system is constantly active and alerts the driver in case of pressure loss or insufficient pressure. When a drop in pressure is detected, a warning light appears on the instrument panel (an orange tyre with an exclamation mark inside). You will need to check the pressure of all four tyres. Remember to perform this operation when the tyres are cold. Reference pressures can be found on the label located on the driver's door frame. Once the pressure is adjusted, the warning light will turn off by itself after a few minutes of driving. It is possible to reset the values for specific driving conditions by pressing the button at the top of the lever to the right of the steering wheel until the set menu appears: hold it for about 3 seconds, the light will flash and then complete after a few minutes of driving. If the pressure drop light and the spanner light come on together, there is a malfunction in the system.

Updated on 9 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Twingo (2014-2024 / Twingo 3, Twingo III) Today we will discover the procedure that will allow us to reset the tire pressure warning (TPMS) on the Renault Twingo; before performing the reset,…
Renault Twingo (2014-2024 / Twingo 3, Twingo III) To reset the tyre pressure light on the Renault Twingo, first inflate the tyres to the correct pressure. Once all tyres are inflated, turn on the ign…
Renault Twingo (2014-2024 / Twingo 3, Twingo III) To set the correct tyre pressure on a Renault Twingo 3, simply follow this short video that explains the exact procedure step by step. First, ensure …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos