Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Tyre Pressure of the Renault Twingo

Model: Renault Twingo Twingo 2 - Years 2007-2014
Part:

If the tyre pressure monitoring system of the Renault Twingo detects a variation from the set values, it signals this by illuminating an orange warning light on the dashboard, represented by a tyre in section with an exclamation mark in the middle. In this case, restore the correct cold inflation pressures; the warning light will turn off after a few minutes of driving. If you need to inflate the tyres to a pressure different from the reference, you must perform a reset: press the button located at the top of the lever to the right of the steering wheel until the tyre icon with the exclamation mark and the word SET appears on the display, press and hold the button for three seconds, release it and the icon will flash for five seconds to confirm the operation. The actual reset will occur after a few minutes of driving.

Updated on 21 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Warning Light in the Renault Twingo?
How to Reset the Tyre Warning Light in the Renault Twingo?
Renault Twingo (2014-2024 / Twingo 3, Twingo III) As we can see in this tutorial, resetting the tyre warning light in the Renault Twingo is a very simple and quick operation. Before proceeding, ensur…
How to Reset the Tyre Pressure Light on the Renault Twingo?
How to Reset the Tyre Pressure Light on the Renault Twingo?
Renault Twingo (2026-2026 / Twingo 4, E-Tech, Twingo III) You can clear the tyre pressure light on the Renault Twingo by inflating the tyres to the optimal pressure value: this value is written on the sticke…
How to Reset the Tyre Pressure Light on the Renault Twingo?
How to Reset the Tyre Pressure Light on the Renault Twingo?
Renault Twingo (2014-2024 / Twingo 3, Twingo III) To reset the tyre pressure light on the Renault Twingo, first inflate the tyres to the correct pressure. Once all tyres are inflated, turn on the ign…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos