Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Renault Kangoo

Model: Renault Kangoo MK 1, KC, KW - Years 1997-2008
Part: Warning light – error code

If you have replaced the engine oil and oil filter on this vehicle, you will need to reset the spanner-shaped warning light that has illuminated on the dashboard. You will find instructions on how to do this in this description, and you can also check the video. The first step is to access the cabin and sit in the driver's seat, turn on the ignition without starting the engine, and locate the button at the bottom of the dashboard, roughly in the centre. Press and hold this button until the spanner-shaped warning light begins to flash, and after a few seconds, the mileage for the new service will update.

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the Service light on the Renault Kangoo?
How to reset the Service light on the Renault Kangoo?
Renault Kangoo (1997-2008 / MK 1, KC, KW) To reset the Service light on the Renault Kangoo, turn on the instrument panel by rotating the key in the ignition switch: once it is on, press and h…
How to Reset the Service Light on a Renault Kangoo
How to Reset the Service Light on a Renault Kangoo
Renault Kangoo (1997-2008 / MK 1, KC, KW) Manually resetting the service light on your first-generation Renault Kangoo (1997-2008) is very simple. Follow these steps to complete the operation…
How to reset the Service light on the Renault Kangoo?
How to reset the Service light on the Renault Kangoo?
Renault Kangoo (2007-2021 / MK 2, FC, FW) To reset the Service light on the Renault Kangoo, insert the ignition key into the ignition switch so that you can turn it to power on the instrument…

Other guides you may be interested in

    Frequently Asked Questions

    • Kangoo 2007-2021 - What does the Serv warning light mean on a Renault Kangoo? Read answer

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos