|
Do it yourself
| |||
| ||||
How to Change the Door Hinge on a Renault Kangoo MK2
Model: Renault Kangoo
MK 2, FC, FW
- Years 2007-2021
If the door of your Kangoo creaks, it is likely the hinge that needs changing. Here’s how to do it. Start by removing the door trim panel, beginning with the lower screws, then the inner side screws, and finally the outer side screws. Use plastic spatulas to pry off the panel, then remove the top part of the handle and the external mirror control. Once the handle is open, you can access the screws holding the panel in place. There are also clips to remove, which are connected to the window regulator (which in this case is manual). Now you can remove the screws that attach the door to the frame, and then loosen the lower hinge. You will need to lift the rubber protection that shields the inside of the door to access the internal screws: we will reattach it later. Now, you have removed the creaking hinge. Lubricate the new one well with silicone grease before positioning it, then place it in position and connect it to the frame. Do not tighten the screws too much, as you risk breaking the heads. Now reattach the part you removed and replace the panel. Operation complete.
Updated on 16 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Renault Kangoo
(2007-2021 /
MK 2, FC, FW)
In this video, we will see how to change the timing belt on a Renault Kangoo 1.5 dCi: start by disconnecting the negative battery terminal, then remo…
Renault Kangoo
(2007-2021 /
MK 2, FC, FW)
Today we will see the instructions that will allow us to reassemble the front door panel of the Renault Kangoo. First of all, we bring the panel clos…
Renault Kangoo
(2007-2021 /
MK 2, FC, FW)
This short and simple guide will show us the steps on how to disassemble and replace the internal handle of the front door of the Renault Kangoo, fol…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |