Do it yourself
| ||||
|
Renault Megane - Video tutorial
Model: Renault Megane
Megane 4, Megane IV
- Years 2015-2023 The Renault Megane's tire pressure monitoring system uses a sensor installed in the inflation valve of each tire and signals any anomalies on the instrumentation: if the indicated value is yellow, it means that the pressure is low, and if it is red, the tire may be severely deflated. We check the pressure only when the tires are cold, and if necessary, consult the plate located on the driver's door frame, which indicates the reference values. To reset the reference values, press the button on the left-hand side of the steering wheel until the pressures of the four tires appear on the display, then press again until the words flash, followed by dashes, and finally the new reference values. We can perform the same operation using OpenR Link on the service display by tapping "vehicle," then "vehicle" again, and then "tire pressure." Select "reset" and confirm with "yes." The confirmation message will appear on the display.
Posted on 13 June 2023 by ScegliAuto
Resetting the service indicator of the Renault Megane
Renault Megane (2015-2023 / Megane 4, Megane IV) After we have adjusted the tire pressure, either to match a different load condition or to fix a flat tire, we must reset the monitoring system. Sitt
Checking the pressure of the Renault tyres
Renault Megane (2015-2023 / Megane 4, Megane IV) The tire pressure monitoring system in a Renault Megane monitors the current inflation pressure and reports this data on the instrument cluster and m
How do you reset the tire pressure warning light on the Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) In order to reset the tire pressure sensor of the Renault Megane, first you need to inflate the tires, bringing them back to the correct inflation pr Other guides that may interest you
|
Disassembly of the gear knob on the Lancia Ypsilon 2Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.023
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |