Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Renault
  4. :
  5. Scenic
  6. : How to replace the air filter on the Renault Scenic 1st generation.

Renault Scenic - Video tutorial

Model: Renault Scenic MK 1, RX4, Scenic 1 - Years 1993-2003
Part: Air filter
Operation: How to replace the air filter on the Renault Scenic 1st generation.

In this video, we see how to replace the air filter of a first-generation Renault Scenic. First, we need to remove the air tube that fits into the filter's inlet by removing the screw from the clamp that tightens it. We remove the airbox by applying force to remove it from its housing. We disconnect the housing of the air duct, clean it thoroughly, then unscrew the fixing bolts from the filter housing and remove it from its usual position. We clean the air filter housing and replace it with the new one, then put it back in its place. We reattach the fixing bolts and reconnect the air duct housing, put the airbox back in place, and put the tube back in place by tightening the clamp. Job done!


Posted on 22 June 2023 by ScegliAuto



How to replace the air filter of the Renault Scenic 2
Renault Scenic (2003-2009 / MK 2, Scenic 2) In the following guide dedicated to all of you who own a Renault Scenic Mk2, we will discover the steps you need to take to correctly replace the eng
How to replace the air filter on the Renault Scenic
Renault Scenic (1993-2003 / MK 1, RX4, Scenic 1) If you want to replace the air filter on your Renault Scenic yourself but you don't know how to do it, then read the following mini guide carefully a
Renault Scenic air filter replacement
Renault Scenic (2003-2009 / MK 2, Scenic 2) How do you replace the air filter on a Renault Scenic? Let's see how to remove the car air filter from inside the engine compartment. We open the eng

    Frequently Asked Questions

    • Scenic 2009-2015 - Where is the Renault Scenic 3 engine air filter located? Read Answer
    • Scenic 2003-2009 - Where is the Renault Scenic II engine air filter located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos