Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Scenic
    4. : Renault Scenic air filter replacement

Renault Scenic - Video tutorial

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Air filter
Operation: Renault Scenic air filter replacement

In this video we will see how to replace the engine air filter of the Renault Scenic second series. First we open the bonnet and remove the rubber gasket of the engine: now the three fixing screws of the grille located above the gasket with a 10mm wrench. Now let's pull the grille towards again to extract it: unscrew the two fixing bolts of the engine protection shield always using a 10 mm wrench. We then remove the engine protection and unscrew the screws of the air filter cover. We take out the filter with all the support and reassemble the new one!


Posted on 7 December 2023 by ScegliAuto



Renault Scenic air filter replacement
Renault Scenic (2003-2009 / MK 2, Scenic 2) How do you replace the air filter on a Renault Scenic? Let's see how to remove the car air filter from inside the engine compartment. We open the eng
How to replace the air filter of the Renault Scenic 2
Renault Scenic (2003-2009 / MK 2, Scenic 2) In the following guide dedicated to all of you who own a Renault Scenic Mk2, we will discover the steps you need to take to correctly replace the eng
Replacement of the cabin air filter of the Renault Scenic
Renault Scenic (2009-2015 / MK III, MK 3, Scenic III, Scenic 3) To ensure a circulation of always clean air in the air conditioning system of the Renault Scenic, we must periodically replace the dedicated filter.

Other guides that may interest you

    Frequently Asked Questions

    • Scenic 2009-2015 - Where is the Renault Scenic 3 engine air filter located? Read Answer
    • Scenic 2003-2009 - Where is the Renault Scenic II engine air filter located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos