Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Laguna
    4. : Cabin air filter replacement

Renault Laguna - Video tutorial

Model: Renault Laguna X74, MK 2, Laguna 2 - Years 2001-2007
Part: Cabin air filter
Operation: Cabin air filter replacement

In the car model in question, the passenger compartment air filter is located in the engine compartment, immediately under the windscreen on the passenger side; to be able to replace it, open the front hood, unhook the gasket along the rear edge and then remove the plastic grille located just below the windscreen; once you have reached the seat of the passenger compartment air filter, remove it and make sure that there are no dirt residues inside its case; insert the new one (we recommend the activated carbon one) orienting it according to the direction of the air flow indicated by the arrows.


Posted on 2 September 2023 by ScegliAuto



How to remove the Renault Laguna air filter
Renault Laguna (2001-2007 / X74, MK 2, Laguna 2) How to replace the pollen filter on a Renault Laguna? Let's see in this video how to perform the disassembly: lift the front hood, then unscrew the f
How to replace the air filter on a Renault Laguna
Renault Laguna (2001-2007 / X74, MK 2, Laguna 2) Before we can begin, we will have to open the front hood of our Renault Laguna. So let's start by unscrewing and removing the screws that secure the
Engine air filter replacement
Renault Laguna (2007-2015 / MK 3, Laguna III, Laguna 3, MK III, X91) Replacing the engine air filter periodically is to the full advantage of engine performance and consumption as it will always ensure the right amount

Other guides that may interest you

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos