Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure warning light on the Renault Megane?

Model: Renault Megane Megane IV, Megane 4 - Years 2015-2023
Part:

In this tutorial, we can see how to reset the tire warning light in the Renault Megane, an extremely simple and quick operation, to be carried out only once the correct tire pressure has been restored following the instructions in the manual. First of all, let's go inside the car, then turn on the instrument panel and, using the directional arrows located on the right side of the steering wheel, reach the screen related to the warning. Once we have done this, we hold down the down arrow button for the necessary time for the light to disappear completely.

Posted on 7 September 2023 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure warning light on the Renault Megane
How to reset the tire pressure warning light on the Renault Megane
Renault Megane (2015-2023 / Megane IV, Megane 4) These short and simple steps will allow us to reset the tire pressure monitoring system (TPMS) light on the Renault Megane; before performing the res…
How to reset the tire warning light on Renault Megane
How to reset the tire warning light on Renault Megane
Renault Megane (2015-2023 / Megane IV, Megane 4) If when you start the instrument panel of your Renault Megane fourth series (year 2015-2022) the tire pressure warning light comes on and you are sur…
How to reset the tire pressure sensor on the Renault Megane
How to reset the tire pressure sensor on the Renault Megane
Renault Megane (2015-2023 / Megane IV, Megane 4) Today's steps will show us the process that will allow us to reset the tire pressure warning light on the Renault Megane; before performing the TPMS …

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos