Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the parking lights in the Renault Scenic?

Model: Renault Scenic Scenic 2, MK 2 - Years 2003-2009
Part: Headlight bulb

In this tutorial, we can see how to replace the position light bulbs in the Renault Scenic, an extremely simple and quick operation. First of all, make sure the key is not inserted so that we can work safely. Then, open the engine hood, locate the bulb holder of the light in question, and by rotating it slightly counterclockwise, remove it from the housing. Next, remove the old bulb, insert the replacement one, avoiding touching the glass directly with bare hands, and follow the reverse procedure. If necessary, repeat the operation on the opposite headlight.

Posted on 28 September 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the sidelight bulbs in Renault Scenic?
How to replace the sidelight bulbs in Renault Scenic?
Renault Scenic (2003-2009 / Scenic 2, MK 2) As we can see in this tutorial, changing the sidelight bulbs in your Renault Scenic is an extremely simple and fast operation. Before proceeding, let…
How to replace the rear headlight bulb of the Renault Scenic 3
How to replace the rear headlight bulb of the Renault Scenic 3
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) To replace the rear headlight bulb of the Renault Scénic model 3, we need to open the trunk and unscrew the three screws located along the side of th…
Replacing the rear light bulbs on the Renault Scenic
Replacing the rear light bulbs on the Renault Scenic
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) In this guide we will see the steps that will allow us to disassemble and replace the rear light bulbs of the Renault Scenic. First we open the tailg…

Other guides you may be interested in

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos