Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Light on a Renault Megane 4

Model: Renault Megane Megane 4, Megane IV - Years 2015-2023
Part: Tail light

This brief video tutorial shows the necessary steps to replace the rear light on a fourth-generation Renault Megane, produced from 2015 to 2022. This operation is not complicated and can be done independently in just a few minutes. Simply open the vehicle's boot and remove the panel located next to the rear of the light. Once removed, unscrew the plastic screw as shown in the video, then pull out the light by disconnecting the bulb wiring. Finally, refit the light following the reverse procedure.

Updated on 23 August 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to replace the rear headlight bulb of the Renault Megane 3
How to replace the rear headlight bulb of the Renault Megane 3
Renault Megane (2008-2015 / Megane III, Megane 3) If you want to replace one of the bulbs located inside the rear light of your Renault Megane Mk3, all you have to do is follow the procedure describe…
Replacing the Rear Light Bulbs on a Renault Megane
Replacing the Rear Light Bulbs on a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) To replace the rear light bulbs on your Renault Megane, follow these steps. Open the boot and use a lever to remove the plastic cover next to the boo…
How to Change the Rear Light of the Renault Megane
How to Change the Rear Light of the Renault Megane
Renault Megane (2002-2010 / Megane 2) This guide shows how to remove and replace the rear light of the Renault Megane in simple and quick steps. First, open the boot lid and start by remo…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos