Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Renault
  4. :
  5. Scenic
  6. : How to replace the bulb of the Renault Scenic.

Renault Scenic - Video tutorial

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Headlight bulb
Operation: How to replace the bulb of the Renault Scenic.

In this video tutorial, the procedure for replacing the front headlight bulb of the Renault Scenic 2 is shown. The procedure is very simple as all you need to do is open the vehicle's hood and behind the headlight, you will find the bulb with its housing. Simply turn it half a turn clockwise and pull it outwards to remove the bulb. Once the housing with the bulb is removed, simply pull out the old bulb, then insert the new one and put the bulb back in place by rotating it half a turn counterclockwise to lock it.


Posted on 21 October 2023 by ScegliAuto



How to replace the headlight bulb on a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) Before we can start, we will have to go and open the front hood of our Renault Scenic. So let's start by extracting the burnt out bulb from its housi
How to replace the headlight bulb on a Renault Scenic
Renault Scenic (1996-2003 / ) Before starting, we will have to open the front hood of our Renault Scenic. So let's start by disengaging and removing the back cover of the burned o
Replacing the bulb of an arrow on a Renault Scenic
Renault Scenic (2009-2015 / MK III, MK 3, Scenic III, Scenic 3) Let's see together how to replace the indicator light bulb on a Renault Scenic. We open the hood of the engine compartment and put it in safety, we r

Other guides that may interest you

    Frequently Asked Questions

    • Scenic 2009-2015 - How to replace the headlight bulb on the Renault Scenic 3? Read Answer
    • Scenic 2009-2015 - What bulbs is fitted to the headlight of the Renault Scenic x-mod? Read Answer
    • Scenic 2009-2015 - How much do the front bulbs of the Renault Scenic Xmod cost? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos