Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Renault
  4. :
  5. Master
  6. : How to reset the service reminder in a Renault Master.

Renault Master - Video tutorial

Model: Renault Master MK 2 - Years 1997-2010
Part: -board computer
Operation: How to reset the service reminder in a Renault Master.

In this video tutorial, we can see how it is possible to reset the service reminder on a Renault Master by following some simple steps that allow you to manage the vehicle independently. The first thing to do is to perform vehicle maintenance, such as changing the engine oil and filters. After performing the DIY maintenance, you need to get in the car to restore the service. You have to turn on the vehicle, then use the buttons on the right control lever. Press the button with the arrow pointing upwards once, then hold down the button at the top of the control lever until you see the mileage start flashing on the display below the speedometer. Continue holding it down until the reset is complete. Turn off and restart the car to verify that the reset has been done correctly.


Posted on 26 October 2023 by ScegliAuto



How to restore the oil change reminder on a 2015 Renault Master.
Renault Master (2010-2023 / MK 3) In this video tutorial, we can see how it is possible to reset the oil change reminder in a 2015 Renault Master, following a few simple steps: the fi
How to reset the service light on Renault Master?
Renault Master (2010-2023 / MK 3) To reset the service light on a Renault Master vehicle, it is recommended to follow these steps: Turn on the car and make sure the display shows the
How do you reset the Service light on the Renault Master?
Renault Master (2010-2023 / MK 3) To reset the Renault Master's Service light, you need to turn on the instrument panel by turning the key in its ignition switch. Once the panel is on

    Frequently Asked Questions

    • Master 2010-2023 - Where is the meaning of all the warning lights on the Renault Master? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos