Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil warning light on the Trafic 2

Model: Renault Trafic MK 2 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Checks and maintenance

See other generations:
Video tutorial

This video shows the procedure to reset the oil change warning light on the Renault Trafic 2. The procedure takes less than 1 minute to complete and should only be done after changing the oil. To reset the warning light, insert the key without turning it, press the accelerator pedal fully down, while holding it down, start the instrument panel.

Once the panel is on, press the brake pedal three times while still holding the accelerator pedal.

Now you can restart the instrument panel to check that the procedure has been successful.


Updated on 29 August 2026 by ScegliAuto


Related tutorials

Replace the Gear Knob on Trafic
Replace the Gear Knob on Trafic
Renault Trafic (2001-2014 / MK 2) How to replace the gear knob on Trafic? Remove the damaged knob and replace it. Take the knob in your hands and twist it left and right until it come…
How to Perform a Service on a Renault Trafic?
How to Perform a Service on a Renault Trafic?
Renault Trafic (2014-2026 / MK 3) To perform a basic service on the Renault Trafic, you will need: engine oil that meets the specifications indicated for the vehicle, an oil filter, a…
How to Reset the Service Light on the 2014 Renault Trafic
How to Reset the Service Light on the 2014 Renault Trafic
Renault Trafic (2001-2014 / MK 2) The procedure required to manually reset the service light on your 2014 Renault Trafic is practically identical to that used in many other Renault mo…

    Frequently Asked Questions

    • Trafic 2014-2027 - Where is the inertia switch located in the Renault Trafic van? Read answer
    • Trafic 2014-2027 - Why does the Start and Stop of a Renault Trafic not work? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos