Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Renault Megane 4

Model: Renault Megane Megane 4, Megane IV - Years 2015-2023
Part: Service warning light

To permanently eliminate the service light from the dashboard of your Renault Megane Mk4 (2015-2022), simply carry out the regular service at an authorised workshop. However, if the light continues to illuminate due to a fault in the control unit, a manual reset is necessary. Let's find out how. Once the ignition is on, use the button located on the right side of the steering wheel to navigate the menu and locate the "Service Interval" option. Then, press and hold the "OK" button and wait for the service light reset to complete. Finally, exit the menu and turn off the ignition.

Updated on 31 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Renault Megane 3
How to Reset the Service Light on a Renault Megane 3
Renault Megane (2008-2015 / Megane III, Megane 3) In this very short tutorial, we will see how to reset the service light on a Renault Megane 3, model produced from 2008 to 2015. Start the procedure …
How to Manually Reset the Service Light of the Renault Megane 2
How to Manually Reset the Service Light of the Renault Megane 2
Renault Megane (2002-2010 / Megane 2) To manually reset the service light on the display of your Renault Megane Mk2, follow the procedure described in this mini guide. First, enter the ca…
How to reset the service light on the Renault Megane 3
Renault Megane (2008-2015 / Megane III, Megane 3) To manually reset the service light that continues to stay on the instrument panel of your Renault Megane Mk3 even after the car's service, simply fo…

Other guides you may be interested in

    Frequently Asked Questions

    • Megane 2015-2023 - How to reset the "Service" light on a Renault Megane? Read answer

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos