Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Renault Megane?

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Service warning light

To reset the Service light on a Renault Megane, turn on the ignition by turning the key in the ignition switch: once the dashboard is lit up, navigate through the menu that appears on the dashboard by repeatedly pressing the button on the lever to the right of the steering wheel. This will allow you to reach the option indicating the kilometres remaining until maintenance: when this option appears, press and hold the button for a few seconds until the light is reset.

Updated on 4 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the Service light on the Renault Megane?
How to reset the Service light on the Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) To reset the Service light on the Renault Megane, turn on the ignition by inserting the key and pressing the appropriate button. Once the instrument …
How to Reset the "Service" Light on a Renault Megane
How to Reset the "Service" Light on a Renault Megane
Renault Megane (2015-2023 / Megane 4, Megane IV) Before you start, sit in the driver's seat of your Renault Megane. Begin by activating the instrument cluster without starting the engine. Then, usin…
How to Reset the Maintenance Light on the Renault Megane 3
How to Reset the Maintenance Light on the Renault Megane 3
Renault Megane (2008-2015 / Megane III, Megane 3) Today, we will see how to reset the service light on our Renault Megane 3. First, enter the car, close the doors, insert the key card, and switch on …

Other guides you may be interested in

    Frequently Asked Questions

    • Megane 2015-2023 - How to reset the "Service" light on a Renault Megane? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos