Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front bumper on the Renault Trafic van?

Model: Renault Trafic MK 2 - Years 2001-2014
Part: Front bumper

In this tutorial, you can see how to remove the front bumper on the Renault Trafic van, a very simple and quick operation. First, open the bonnet, then unscrew the fastening bolts of the grille using a Torx T27 key. Next, unscrew all the additional indicated bolts located both inside the wheel arches and at the lower edge of the bumper, then detach the upper half and continue by removing the lower half. At this point, simply position the replacements and install them following the exact reverse procedure.

Updated on 10 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Radiator in the Renault Trafic Van?
How to Replace the Radiator in the Renault Trafic Van?
Renault Trafic (2001-2014 / MK 2) In this tutorial, you will see how to replace the radiator in the Renault Trafic van. Before proceeding, you will need to remove the front bumper to …
How do you remove the front bumper of the Renault Trafic?
How do you remove the front bumper of the Renault Trafic?
Renault Trafic (2001-2014 / MK 2) To remove the front bumper of the Renault Trafic, you need to lever it with an object in order to detach the grille at the top: once this grille has …
Removing the Starter Motor from a Renault Trafic
Removing the Starter Motor from a Renault Trafic
Renault Trafic (2001-2014 / MK 2) How to remove the starter motor from a Renault Trafic? Here’s how to remove the damaged part. Disconnect the power terminals of the starter motor usi…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos