Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Light Switch Lever on a Renault Kangoo

Model: Renault Kangoo MK 2, FC, FW - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

See other generations:
Video tutorial

This video demonstrates how to replace the light switch lever on a Renault Kangoo. First, remove the cover located on the steering wheel: it’s not difficult as it is only clipped in, so use plastic spatulas to pry it off. The lower cover is held by three screws, two are on the outer part and one is found inside.

Turn the steering wheel to maximise the available space for working. Using a small screwdriver, remove the two screws that secure the lever to the electrical connector at the base of the steering wheel; once these are removed, the lever will come off easily.


Updated on 10 September 2026 by ScegliAuto


Related tutorials

How to Replace Engine Oil and Oil Filter on a Renault Kangoo
How to Replace Engine Oil and Oil Filter on a Renault Kangoo
Renault Kangoo (1997-2008 / KC, MK 1, KW) In this brief video, you will see how to change the engine oil and oil filter on your Renault Kangoo. It is not a complex task; just be careful and y…
How to reset the tyre pressure warning light on the Renault Kangoo?
How to reset the tyre pressure warning light on the Renault Kangoo?
Renault Kangoo (2007-2021 / MK 2, FC, FW) To reset the tyre pressure warning light on the Renault Kangoo, turn on the ignition by inserting the key into the ignition switch. Once the dashboar…
How to Change the Oil in a Renault Kangoo 1?
How to Change the Oil in a Renault Kangoo 1?
Renault Kangoo (1997-2008 / KC, MK 1, KW) This video clearly shows how to change the engine oil in a Renault Kangoo. If you want to proceed with this DIY maintenance, gather the right tools, …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos