Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on the Renault Master

Model: Renault Master MK 3 - Years 2010-2023
Part: Checks and maintenance

In this article, we will discuss the procedure to reset the service light on the 2020 Renault Master. It is recommended to perform this procedure only after servicing the vehicle. To reset, first start the instrument panel without starting the engine, then use the up arrow button on the wiper stalk to navigate the menu until you find the service light option. Once located, press and hold the up arrow button for about 10 to 15 seconds; the light will start flashing and then reset, stopping the flashing. When the light stops flashing, you can release the button and restart the panel to check that the procedure was successful.

Updated on 15 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Maintenance Light on the Renault Master 3
How to Reset the Maintenance Light on the Renault Master 3
Renault Master (2010-2023 / MK 3) This short video tutorial illustrates the procedure to reset the maintenance light on the Renault Master 3. It is advisable to perform this procedure…
How to Reset the Oil Warning Light on the Renault Master
How to Reset the Oil Warning Light on the Renault Master
Renault Master (2010-2023 / MK 3) In this article, with the help of the video, you will learn how to reset the oil warning light on the Renault Master. The procedure does not require …
How to Reset the Oil Change Reminder in a 2015 Renault Master
How to Reset the Oil Change Reminder in a 2015 Renault Master
Renault Master (2010-2023 / MK 3) In this video tutorial, you will see how to reset the oil change reminder in a 2015 Renault Master by following a few simple steps: the first thing t…

    Frequently Asked Questions

    • Master 2010-2023 - What problems does the Renault Master 2.3 dCi have? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos