Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Clio
    4. : How to disassemble the front of the Clio 3

Renault Clio - Video tutorial

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Front bumper
Operation: How to disassemble the front of the Clio 3

Disassembling the front bumper of a Renault Clio 3 is a very simple operation that can be easily done independently by following our video guide. To start the disassembly operation, park the car on a flat surface and wait a few minutes for the engine to cool down, even if in the case of our video the front bumper has already been removed. Then proceed with the removal of the front bumper. First, remove the headlights by unscrewing the pins located on the top, once the headlights are removed, you can remove the metal base in front of the grille by removing the central nuts. After removing this, proceed to remove the side parts of the car using a Torx key. Once the front bumper is removed, you can clean the engine and the entire compartment.


Posted on 11 March 2024 by ScegliAuto



How to disassemble the headlight of the Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Let's see below the steps that will allow us to disassemble and replace the front light and its bulbs on the Renault Clio, following the instructions
How to disassemble the front shock absorbers in Renault Clio?
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In this tutorial we can see how to disassemble the front shock absorbers on the Renault Clio, a simple operation that requires good manual skills. Fi
How to disassemble the front seat of the Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) Let's see the main instructions to disassemble the front seat of the Renault Clio, in simple and quick steps. First of all, we open the front door an

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos