Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Starter Motor from the Renault Clio

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Starter motor

See other generations:
Video tutorial

Today's guide will show you how to remove and replace the starter motor on the Renault Clio, following the instructions below. First, open the bonnet of the vehicle and begin by removing the plastic engine cover; then disconnect the intake hose and subsequently remove the battery by disconnecting both terminals, as shown in the video.

At this point, unscrew the fixing screws of the starter motor, disconnecting the electrical wiring to remove it; replace it with the new one and reassemble everything!


Updated on 26 September 2026 by ScegliAuto


Related tutorials

Guide to replacing the starter motor of the Renault Clio
Guide to replacing the starter motor of the Renault Clio
Renault Clio (1998-2005 / MK 2, Clio 2) Today's instructions will show us how to disassemble and replace the starter motor of the Renault Clio. First, we open the engine hood of the car and…
Guide to Replacing the Starter Motor on a Renault Clio
Guide to Replacing the Starter Motor on a Renault Clio
Renault Clio (1998-2005 / MK 2, Clio 2) Today's instructions will show you how to remove and replace the starter motor on a Renault Clio, following these simple steps. First, open the bonne…
Replacing the Starter Motor on the Renault Clio 2 1.2 8V
Replacing the Starter Motor on the Renault Clio 2 1.2 8V
Renault Clio (1998-2005 / MK 2, Clio 2) In today's video, we will see the main instructions that will allow us to dismantle and replace the starter motor on the Renault Clio 1.2 8V petrol. …

Other guides you may be interested in

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos