Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Set the time on the Renault Master

Model: Renault Master MK 3 - Years 2010-2023
Part: Clock

When the power supply to the Renault Master is cut off and then restored, we need to set the time. To do this, we sit in the driver's seat, turn on the instrument panel, use the two buttons at the end of the lever to the right of the steering wheel, select the "set" option on the display below the speedometer. When the text starts flashing, press the bottom button for a few seconds until only the hour display is flashing. Use the top button to set the desired time and press the bottom button until only the minute display is flashing, adjust with the top button. Turn off and on the instrument panel to confirm.

Posted on 12 April 2024 by ScegliAuto

This video is currently unavailable

Related tutorials

How to set the time on the Renault Master
How to set the time on the Renault Master
Renault Master (1997-2010 / MK 2) In a few simple steps, we will see how to adjust the time on the instrument panel of the Renault Master. First of all, we get on board the vehicle an…
How to set the time in Renault Master?
How to set the time in Renault Master?
Renault Master (2010-2023 / MK 3) In this tutorial we can see how to set the time in the Renault Master van, a very simple operation, to be carried out after being left with the batte…
How to set the time on Renault Master 2008
How to set the time on Renault Master 2008
Renault Master (1997-2010 / MK 2) If you need to change the time set on your Renault Master, just follow this simple procedure: with the key inserted, the ignition on and the engine o…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos