Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the AUX Adapter Cable on a Renault Scenic

Model: Renault Scenic Scenic 2, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Car stereo

See other generations:
Video tutorial

In this video, you will see how to install the AUX adapter cable on a Renault. The interface allows you to connect any audio device to the original audio system of a Renault.

It works with Renault radios that have the AUX option listed in the update menu, but most Renault vehicles have this type of radio. You can find this adapter on Amazon with the code B07P6W6BDG for £9.99 (but it will cost an additional £17.53 for shipping to the UK). The installation is very simple: using two keys to remove the radio, take off the front panel and simply plug the connector into place.

Route the jack out from the passenger footwell, and you’re done. It works with any device that has a headphone jack.


Updated on 1 October 2026 by ScegliAuto


Related tutorials

How do you open the hood of the Renault Scenic when the cable is broken?
How do you open the hood of the Renault Scenic when the cable is broken?
Renault Scenic (2016-2022 / Scenic IV, Scenic 4, MK IV, MK 4) The opening of the hood of any car, including the Renault Scenic, is well known to be done through the lever inside the cabin, as the video shows us,…
How to Change the Rear Wiper Blade on a Renault Scenic
How to Change the Rear Wiper Blade on a Renault Scenic
Renault Scenic (2003-2009 / Scenic 2, MK 2) Let's see how to change the rear wiper blade on a Renault Scenic. This is a very simple task to do yourself. Grip the rear wiper arm, gently pull it …
How to replace the battery of the Renault Scenic 3
How to replace the battery of the Renault Scenic 3
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) The battery of the Renault Scenic model mk3 is located inside the front hood, in the compartment to the right of the engine. To replace the battery, …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos