|
Do it yourself
| |||
| ||||
Where are the fuses located in the Renault Kangoo?
Model: Renault Kangoo
MK 1, KC, KW
- Years 1997-2008
The fuse box in the Renault Kangoo in the cabin is located to the left or below the steering wheel, we remove the cover by pulling the handle; once the handle is pulled and the cover is removed, we can reach the fuses inside the cabin; the fuse box in the engine compartment, on the other hand, is located to the right of the battery, to reach the fuses, we must remove the cover by acting on the side tabs; once the cover of the box is removed, we find the fuses. To replace a fuse, we identify it based on the faulty component, we grab it with small pliers, we extract it and check if the bridge inside it is intact, the fuse is working, otherwise if the bridge inside it is broken the fuse needs to be replaced. Replace the fuse with one of the same amperage.
Posted on 13 June 2024 by ScegliAuto
Video tutorial
Related tutorials
Renault Kangoo
(1997-2008 /
MK 1, KC, KW)
To manage the operation of the devices present on the Renault Kangoo, it will be necessary to locate the appropriate fuse boxes that contain the fuse…
Renault Kangoo
(1997-2008 /
MK 1, KC, KW)
The fuse boxes on the Renault Kangoo contain fuses that regulate the operation of various devices. In this type of vehicle, the first fuse box is loc…
Renault Kangoo
(2020-2026 /
KFK, MK 3, FFK)
On the Renault Kangoo, you can find two boxes that contain the fuses: the first box is located in the lower left part of the dashboard relative to th…
Other guides you may be interested in
|
Frequently Asked QuestionsWhere is the Fuel Filter Located in a Volvo XC60?
In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.263
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |