Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front suspensions of the Renault Twingo

Model: Renault Twingo Twingo 2 - Years 2007-2014
Part: Suspension system

Today we will see the steps that will allow us to disassemble and replace the front suspensions of the Renault Twingo. First of all, we open the hood and lift the car, removing the front wheel; then we disconnect the front suspension from the engine compartment support, unscrewing the upper nut, as shown in the video. At this point, we detach the rear suspension from the lower part, removing it and replacing it with the new one; then we install the new original suspension, following the same procedure for the replacement of the other front suspension!

Posted on 18 June 2024 by ScegliAuto

Video tutorial

Related tutorials

…
How to Replace the Front Headlight Bulbs in a Renault Twingo?
How to Replace the Front Headlight Bulbs in a Renault Twingo?
Renault Twingo (2014-2024 / Twingo 3, Twingo III) In this tutorial, you will see how to replace the front headlight bulbs in a Renault Twingo, a very simple and quick operation. First, ensure that th…
The turning radius of the Renault Twingo III
The turning radius of the Renault Twingo III
Renault Twingo (2014-2024 / Twingo 3, Twingo III) The Renault Twingo, especially in its latest generation, is legendary for its very tight turning radius, thanks to its front-wheel drive and rear-mou…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos