Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the third brake light of a Renault Megane 2

Model: Renault Megane Megane 2 - Years 2002-2010
Part:

Today we will see how to remove the third brake light on a Renault Megane, second generation model produced from 2002 to 2010. So let's start the operation by opening the rear trunk of the car, then with a Phillips screwdriver we unscrew the screws that fix the internal plastics of the tailgate and remove them as shown in the video. Once this is done, with the help of a flathead screwdriver, we release the two metal tabs that hold the third brake light in place, then lower the tailgate, remove the third brake light and disconnect its wiring to remove it completely.

Posted on 18 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the third brake light on the Renault Megane.
How to replace the third brake light on the Renault Megane.
Renault Megane (2008-2015 / Megane 3, Megane III) Today we will explain how to independently replace the third brake light on a Renault Megane vehicle. To carry out the replacement, we need to open t…
How to replace the third brake light on a Renault Megane.
How to replace the third brake light on a Renault Megane.
Renault Megane (2008-2015 / Megane 3, Megane III) Let's see how to replace the third brake light bulbs on a Renault Megane: lift the rear hatch and remove the third brake light cover from the inside …
Rear Light Bulb Replacement
Renault Megane (1995-2003 / Megane 1) To replace the bulbs of the so-called third brake light, simply open the boot, remove the plastic cover protecting the light, disconnect the power co…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos