Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of steering tie rods

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Tie rods

Lift the vehicle and secure it, then remove the wheel for easier access to the mechanics. Use some penetrating spray to easily loosen the adjustment nut of the tie rod, which should then be unscrewed using a spanner. Unscrew the tie rod bolt and pull it out from its seat. Rotate the freed tie rod until it is completely unscrewed. Screw the new tie rod onto the pin and insert the other end into the wheel arm. Tighten the corresponding bolt. Adjust the lock nut and secure it. After this operation, it is necessary to check the wheel alignment.

Updated on 2 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the Handbrake Lever
Replacement of the Handbrake Lever
Renault Megane (2002-2010 / Megane 2) To replace the handbrake lever, you need to remove the cover of the central tunnel and part of the cover in the lower area of the console. Once all t…
Steering Replacement on Megane
Steering Replacement on Megane
Renault Megane (2015-2023 / Megane 4, Megane IV) Replace the steering on a Megane. Before removing the steering, disconnect the airbag. Insert a screwdriver into the cover of the steering wheel (rea…
How to Replace the Track Rod Ends on a Renault Megane
How to Replace the Track Rod Ends on a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) In this video tutorial, you will see how to replace the track rod ends on a Renault Megane by following some essential steps: first, get into the veh…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos